Parr-instrument A695VB User Manual

Browse online or download User Manual for Measuring instruments Parr-instrument A695VB. Parr Instrument A695VB User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
A695VB Valve
Operation and Maintenance Instruction Manual
664M
Operation/Caution
The A695VB Series Valve has a soft seat seal.
Note: While this type of valve seals very
easily, they also have a tendency to be
overtightened” when closing during
operation.
CAUTION: Overtightening” will cause the
20VBHA Valve Seat to extrude into the valve
body, pinching off the orifice of the 20VBHA
Valve Seat. This may reduce flow through the
valve and the 20VBHA Valve Seat may need to
be replaced.
Dissasembly of the A695VB Series Valve
1. Fully open the valve by turning the bar
handle counter clockwise.
2. Loosen the packing nut by turning it counter
clockwise in relation to the valve body until
it’s threads are clear of the valve body.
3. Pull the handle, needle, and packing nut out
of the valve body together.
4. Remove the washer.
5. Remove the (2) PTFE packing or (1) Grafoil
packing. Inspect these parts for wear and
replace if necessary.
6. Remove the lantern ring.
7. Remove the valve seat and discard.
Assembly of the A695VB Series Valve
1. Before assembly, all parts should be clean
and in good condition.
2. Install the new valve seat into the valve
body.
3. Install the lantern ring.
4. Install the packing.
5. Install the washer.
6. Apply a small amount of molylube (Parr part
number 424HC) to the internal and external
threads of the packing nut.
7. With the valve needle still in the fully open
position, (threaded fully into the packing
nut) hand tighten the handle, needle, and
packing nut into the valve body.
8. When the packing nut has been installed
finger tight, tighten the packing nut with a
wrench an additional “three wrench flats”
(1/2 turn) to pre-load the packing.
9. Again note when closing, the valve should
not be overtightened.
Parr Instrument Company www.parrinst.com
Page view 0
1 2

Summary of Contents

Page 1 - A695VB Valve

A695VB Valve Operation and Maintenance Instruction Manual664MOperation/CautionThe A695VB Series Valve has a soft seat seal.Note: While this type of v

Page 2

A695VB Valve ACTUAL SIZEVALVE SEAT20VBHBPACKING NUT235VBLANTERN RINGPLUG TIP NEEDLE234VB2*696VB*VALVE BODY7VBCMWASHER, MONEL21VB*2X 4VB3PTFE PACKINGSE

Comments to this Manuals

No comments